Venetian blinds

• How to Install Venetian Blinds with Wall Bracket?

  Apr 26, 2024

  Here, I gonna to show you "How to Install Venetian Blinds with Wall Bracket?" Step1: Check package contents Blind Width (600mm-1200mm): 2 Mounting Brackets and 8 Bracket Screws Blind Width (150mm-2400mm): 3 Mounting Brackets and 12 Bracket Screws Step2: Checklist- You'll need the following tools Drill (with 5.5mm drill bit) Measuring Tape Screwdriver Pencil Ruler Step Ladder Step3: Hanging your blind Use the universal bracket, you can install your outdoor venetian blinds into the recess (Fig 1) or on the face of the window(Fig 2).       For window recess / ceiling mounting: Mark the position of the bracket on the ceiling or inside the window frame with a pencil. Ensure that you have at least 60mm clearance (of burglar bars and handles) in the window recess. For wall face mounting: Mark the position of the bracket on the wall with a pencil. Allow 100mm above window to ensure plaster will not chip off. Hold your blind up against the places you have marked to ensure that the brackets will not interfere with the working mechanism inside the headrail of the blind. Use a spirit level to ensure that your brackets are level. Drill the holes. Insert wall plugs into the holes and screw brackets into position. Turn the lever on the brackets to the open position (Fig 3). Clip the headrail of your blind into the brackets (Fig 4) and turn the lever to the closed position, (Fig 5) ensuring that the lever carches the lip of the rail. Attach the wand to hook of the headrail (Fig 6).   Step4: Operating your blind To lower the blind, simply pull the cord to the left to release the cord-lock and hold while the blind drops. Allow the blind to drop to the desired height. Pull the cord to the right to lock the cord in place. To raise the blind, pull the cord to the left to release the cord-lock and pull to the desired height. Pull cord to the right to lock into place again. Twist the wand to tilt slats open and closed. Always ensure the slats are open before raising your Aluminum Venetian blinds. Step5: Cleaning your blind Use a feather duster for your quick clean. A slightly damp cloth for more thorough cleaning.

  hot Tags : Outdoor venetian blinds Aluminum Venetian Blinds Venetian blinds

  Read More
• How to install 2

  Apr 26, 2024

  INTRUCTIONS FOR INSTALLATION AND OPER TION OF 2'' FAUX WOOD BLIND Thank you for purchasing your blinds. We hope that you will enjoy the quality and value of our products. Prior to installation. plcase read instructions and familiarize yourself with the parts of the blind. (Figure A) This package contains: Blind Valance and end pieces 2(or more)Valance Clips 2 Mounting Brackets (left,right) 2 hold down brackets Intermediate Support Brackets (On blinds 36" wide or greater) Installation screws Necessary tools: Screwdriver Tape measure Drill HOW TO INSTALL THE HORIZONTAL 2'' FAUX WOOD BLIND 1. Attach the 2 inch faux wood venetian blinds Brackets Installing End Brackets: Find the end brackets in the bracket pack. Determine where to position each bracket. There is a left bracket and a right bracket. (Figure B & C) Inside Frame Mounting For inside mounting, position top of the bracket against inside surface of the window frame. Diagonally install the two mounting screws. Make sure end brackets are level. (Figure D) Outside Frame Mounting For outside nounting,place the bracket on the surface of the window molding or wall and attach with fasteners sufficient for the installation. (Figure E) Installing 50mm Foam Wood Venetian Blinds Support Brackets (These are provided for blinds over 36'' wide) Space brackets evenly along headrail, between end brackets. Position each bracket so that it will not interfere with movement of the working parts inside the headrail. Make sure support brackets are level with the mounting brackets. (Figure F) Secure support brackets with two screws to window frame(inside mount) or molding (outside mount). 2. Install Headrail Note:When using support brackets,you must first cngage the headrail before inserting the blinds into the end brackets. Lift headrail into position. Insert the headrail into the end brackets. Push headrail all the way back so that the front of the headrail is completely inserted into the brackets. Close the end bracket covers until they snap into place. To remove the headrail, swing the bracket cover up or the side. (You may use a screwdrivcr tip to push the cover open). Remove the headrail. 3. Hang the Valance The plastic valance clips slide into the back of the valance and clip onto the headrail. Attach valance side pieces to outside mount. If inside mount does not have enough room for valance chp to hook onto headrail, attach valance to headrail with heavy-duly double sided foam tape or Velcro.

  hot Tags : Faux wood blinds Venetian blinds Faux wood venetian blinds

  Read More